Files and export
Bring the session with you.
Record to SD, then export after your drive.
You’ll need
- An SD card containing an exportable session archive.
- Firmware 0.7.1+ for remembered export Wi-Fi; 0.8.0+ for version-2 archives.
Steps
Finish recording first
Stop recording before starting Wi-Fi export. Earlier raw .lpr files are retained but are not automatically converted into full session archives.
Start export Wi-Fi
Open Settings → Diagnostics → SESSIONS → START WI-FI. Join the exact network and eight-digit password shown on Lappy.
Open the local page
Keep the connection when your phone reports no internet. Open http://192.168.4.1 and choose Save VBO. Credentials persist from 0.7.1.
Understand the files
0.8.0 exports include course gates and session metadata while preserving receiver UTC and seven full-rate GPS columns. Session duration includes waiting before a timed run.
Return to driving
Stop Wi-Fi before a new recording. Export from 0.8.0 or newer when reading version-2 archives.
If an update is interrupted
Keep the original session folder. It contains your pre-update backup and the exact release. Reconnect the same Lappy and recover that update; a newer release will not replace the interrupted target.
Recovery instructions ›Troubleshooting
No device appears
Try a known USB data cable, another USB port and a direct connection without a hub. Close other software using the serial port.
Permission was denied
Allow USB and local-folder access when prompted. If blocked previously, review this site’s browser permissions.
The backup cannot be saved
No device write is allowed until saved recovery files pass read-back. Choose a local writable folder with enough space.
The update was interrupted
Choose Recover update, select the original session directory and reconnect the same Lappy. Retry uses the exact retained package.
The screen remains dark
After Firmware verified, wait 30 seconds, unplug USB and turn Lappy on normally if needed. If it still cannot start, use the recovery guide and retain the original backup folder.